Fit Parameters

Fit Function

The plots that follow are sums of individual SMD responses in each plane centered around a common mean (here 0), over a +/-40 strips range. The convention for the parameters in the fits below is:

Simulation

The simulation is from single photons thrown at the EEMC with the following pT distribution:

The highest tower above 4 GeV in total energy is selected and the corresponding SMD sector fitted for peaks in both planes, where the area of the peaks in the U plane is constrained to be identical to that of the peak in the V plane. The peak is shifted to be centered at 0 where peaks from other events are then summed. The summed SMD response in each plane is displayed below:

Ditto in log scale.

Ditto by sector.

Fit Widths

Sector # SMD-u σcore SMD-u σtail SMD-v σcore SMD-v σtail
Sector 1 0.869033 ± 0.0142868 3.42031 ± 0.10226 0.84379 ± 0.0185107 3.03287 ± 0.0775009
Sector 2 0.814959 ± 0.0169271 2.99941 ± 0.0730426 0.889892 ± 0.0163065 3.35288 ± 0.0911979
Sector 3 0.84862 ± 0.0148706 3.07648 ± 0.0909689 0.914377 ± 0.014706 3.72821 ± 0.0966915
Sector 4 0.924398 ± 0.0144207 3.74458 ± 0.10611 0.888146 ± 0.0180771 3.06618 ± 0.0647075
Sector 5 0.934218 ± 0.0163887 3.45149 ± 0.0944309 0.911209 ± 0.0175273 3.28633 ± 0.0890581
Sector 6 0.797976 ± 0.0148133 3.20464 ± 0.0986085 0.822437 ± 0.018835 3.30595 ± 0.118813
Sector 7 0.836936 ± 0.0150085 3.28589 ± 0.0853598 0.873338 ± 0.0173883 3.16654 ± 0.0838938
Sector 8 0.828403 ± 0.0167005 3.05517 ± 0.075584 0.891045 ± 0.0152102 3.34806 ± 0.0836394
Sector 9 0.832881 ± 0.0127855 3.3214 ± 0.0762928 0.8436 ± 0.0175466 3.0183 ± 0.079444
Sector 10 0.804059 ± 0.0160906 3.0943 ± 0.0897946 0.874845 ± 0.015788 3.18113 ± 0.0748357
Sector 11 0.930286 ± 0.0187086 3.40024 ± 0.0951671 0.854395 ± 0.0167265 3.21076 ± 0.0812402
Sector 12 3.33227 ± 0.111911 0.848668 ± 0.0142344 0.895174 ± 0.0160939 3.48527 ± 0.12061

Data from 2005 pp200 EEMC HT 1 and 2 triggers

In this sample, high tower triggers, eemc-ht1-mb (96251) and eemc-ht2-mb (96261), from the 2005 p+p at √s=200 GeV ppProduction are selected. The highest tower above 4 GeV is chosen and the corresponding SMD sector is searched for peaks in both planes. Peaks from several events are summed together taking care of shifting them around to have a common mean.

Ditto in log scale.

Data from 2005 pp200 electrons

Here, I try to pick a representative sample of electrons from the 2005 pp200 dataset. The cuts used to pick out electrons are:

The selection for electrons is illustrated in the dE/dx plot below, where the pions should be on the left and the electrons on the right.


Pibero Djawotho
Last modified Tue Aug 15 10:41:19 EDT 2006