Information for Recalibration of RHIC RUN-02
ASCII format dead layer width info
format: [strip] [dead layer] [its error] [T0] [T0 error] [fitting Chi^2/dof]
For practical use, it is recommended to use a average value for each detector,
i.e. 1-12. 13-24, ....
energy coeficient files for each run. When they were used, factor 1.081
was multiplied to obtain the dead layer corrected energy info (Ekin).
- RUN - CONFIG FILE table
- CONFIG FILE README
- BLUE
v100,
v101,
v102,
v103,
v104,
v105,
v106,
v107,
v108,
v109,
- YELLOW
v100,
v101,
v102,
v103,
v104,
v105,
v106,
v107,
v108,
v109,
v110,
v112,
transitioin of the energy coefficients in the form of table.
- EXCEL spread sheet
- 1st calibration 11/29/2001 earlier than any regular run.
- 2nd calibration 1/4/2002 between 472 and 480
- 3rd calibration 1/8/2002 between 559 and 560
- 4th calibration 1/16/2002 between 728 and 729
- 5th calibration 1/24/2002 between after 964